Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  1989 Montauk teak sump pump cover

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   1989 Montauk teak sump pump cover
BobLaux posted 02-06-2004 12:48 PM ET (US)   Profile for BobLaux   Send Email to BobLaux  
I looking for a sump pump cover! Mine sort of fell apart over the years. I've contacted (several times) Cedar Lake in Minnesota, as recommended by Whaler, to no avail. Anyone else have the same problem?
Tom W Clark posted 02-06-2004 01:01 PM ET (US)     Profile for Tom W Clark  Send Email to Tom W Clark     
Bob,

You're talking about a small rectangular piece of teak veneered plywood. If somebody can supply accurate dimensioins and specifications on the radius of the corners, I'll go cut you one and mail it to you. I'm sure I hve some scrap teak ply around...

BobLaux posted 02-06-2004 01:03 PM ET (US)     Profile for BobLaux  Send Email to BobLaux     
Thanks Tom. Boat is in storage (brutal Maine winter!) so next time I'm there I'll take the dimensions and let you know. Appreciate the help.
lhg posted 02-06-2004 02:47 PM ET (US)     Profile for lhg    
Tom - I'm badly in need of a 1/2" teak plywood replacement sump cover for my 18 Outrage. Mine evidently blew out of the boat coasting down a mountain pass at about 80 mph, coming back from the PNW this summer. Could I interest you in making one for me, and not for free?
vdbgroup posted 02-06-2004 08:37 PM ET (US)     Profile for vdbgroup  Send Email to vdbgroup     
I second LHG. I need replacement for my 18. Also, I would like a catalog CD. Xmas is coming soon.
Tom W Clark posted 02-07-2004 12:38 AM ET (US)     Profile for Tom W Clark  Send Email to Tom W Clark     
Larry,

Email your specifications and I'll whip one up for you.

jmorgan40 posted 02-07-2004 06:02 AM ET (US)     Profile for jmorgan40  Send Email to jmorgan40     
There is a guy who sells them on e-bay all the time. He just had one up a wek or so ago. I got mine from him and it is top quality. Keep your eyes open. I went back a few months in my PayPal records. My winning bid was $15.00 Here is his e-mail: steveno11@yahoo.com. Hope this helps.
Joe
peetmin posted 02-07-2004 11:48 AM ET (US)     Profile for peetmin  Send Email to peetmin     
Tom- The rod holders on the sides of my Revenge are beginning to look a little shabby. I was thinking as long as you have the router out maybe you could....pb :-)

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.