Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  Source for fuel line and fittings?

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Source for fuel line and fittings?
billh1963 posted 03-05-2004 05:41 PM ET (US)   Profile for billh1963   Send Email to billh1963  
As you may have surmised by now I have no reasonably located source for marine odds/ends in my area. I want to mount my Racor fuel filter this weekend but need some fittings and marine grade fuel hose. Any ideas of where I should look for something that may hold up in the marine environment?

I can buy a normal fuel hose from Wally World, I guess, and cut off the ends but what about fittings (threaded nipples) for the filter?

Thanks!

LHG posted 03-05-2004 05:55 PM ET (US)     Profile for LHG    
Walmart should have Attwood brand marine fuel hose kits. The brass fittings can be purcahsed at any good hardware store.
Hale posted 03-07-2004 01:29 PM ET (US)     Profile for Hale  Send Email to Hale     
West Marine and Boat US boath have web sites which would seel all of the parts you need as well. If you don't need one of the stock attwood sets it would be cheaper and easier. Also the pre made sets are all made out ob type B fuel line, which is not coast guard aproved if you have to run it where it can't be seen. The stores I mentioned sell marine type A fuel line.

Hale

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.