Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  How to repair damage

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   How to repair damage
Hans Jacobs posted 03-07-2004 02:40 PM ET (US)   Profile for Hans Jacobs   Send Email to Hans Jacobs  
When I bought my Revenge last summer it had a crack at the port rear-end. During the winter I removed all the tape covering this crack and now I like to repair it.

There are 3 photo's of the damage
1. From above (this looks worst)
2. From the side
3. From below.

I hope the photo's are clear enough...

What is the best way to repair this kind of damage?
Thanks for any help

Tom W Clark posted 03-07-2004 06:25 PM ET (US)     Profile for Tom W Clark  Send Email to Tom W Clark     

That looks to be a simple repair. The first thing you need to do is pull the rub rail insert and receiver track off of there and really see what you got. I suspect some gel coat patch paste will repair the damage to the fiberglass.

A new rub rail or at least a new section of receiver track with a new insert will make that corner look like new.

For some tips on fiberglass repair and gel coat patches see:

I do not now if you can get Spectrum to ship a Gel Coat Patch Paste Kit to the Netherlands but if not let me know and I will see what I can do.

Post New Topic  Post Reply
Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.