ContinuousWave   Whaler   Moderated Discussion Areas   ContinuousWave: Whaler Repairs/Mods   Montauk Welded Railings v.Non-Welded    search | FAQ | profile | register | author help

Author	Topic:   Montauk Welded Railings v.Non-Welded
jimithing	posted 03-10-2004 09:29 AM ET (US)         How different are the measurements between the classic montauk welded bowrail/console railings (2001-2002) and the non-welded, old school railings(1970's-late 1990's)?Apparently when shopping for mooring cover there is a big difference.... Anyone have any info on this?
jimithing	posted 03-11-2004 10:19 AM ET (US)             ^
Chuck Tribolet	posted 03-11-2004 01:16 PM ET (US)             I think the welded railings started in '97 or '98, and the bow and console railing didn't become welded at the same exact time. Chuck
jimithing	posted 03-12-2004 09:39 AM ET (US)             I understand that was the case but I also undetstand that the welded console railing is actually lower in height than the nonwelded. Does anyone know this for sure or should I just go ahead and call whaler direct to get an answer? thanks
Chuck Tribolet	posted 03-12-2004 12:04 PM ET (US)             I was corresponding with Mills canvas a while back about a Bimini, and they cared about both rails. There were three possibilities: both bolted, one welded and one bolted, and both welded, and therefore three different bimimi posibilties. Chuck

Hop to: ContinuousWave: The Whaler GAM or General AreaContinuousWave: Whaler MarketplaceContinuousWave: Whaler Repairs/ModsContinuousWave: Whaler PerformanceContinuousWave: Cetacea CommentsContinuousWave: Small Boat ElectricalContinuousWave: Trips and RendezvousContinuousWave: Post-Classic WhalersMETA-Discussion