ContinuousWave   Whaler   Moderated Discussion Areas   ContinuousWave: Whaler Repairs/Mods   Newport console    search | FAQ | profile | register | author help

Author

Topic:   Newport console

JeffA

posted 04-23-2004 11:18 AM ET (US)         I noticed last season that the screws holding the front end of my console down are no longer holding; the screw threads have rust and it appears that the holes in the fiberglass on the floor are a bit mushy from water. Can anyone share some experience on how to fix this problem. Perhaps I could widen the hole in the fiberglass and insert a wood plug using epoxy. Thanks, Jeff

Hop to: ContinuousWave: The Whaler GAM or General AreaContinuousWave: Whaler MarketplaceContinuousWave: Whaler Repairs/ModsContinuousWave: Whaler PerformanceContinuousWave: Cetacea CommentsContinuousWave: Small Boat ElectricalContinuousWave: Trips and RendezvousContinuousWave: Post-Classic WhalersMETA-Discussion