ContinuousWave   Whaler   Moderated Discussion Areas   ContinuousWave: Whaler Repairs/Mods   Swim Step Mounting 24' Outrage 1994    search | FAQ | profile | register | author help

Author	Topic:   Swim Step Mounting 24' Outrage 1994
aquaman	posted 05-24-2004 12:40 PM ET (US)         I have a 1994 24' Outrage. I want to install a swim step on the port side transom. It appears that I only have "through bolt" access in 2 of the 4 mounting points. Would you suggest someone use "Toggler bolts" in those areas that no access is available? How do they mount the swim steps at the factory? Any ideas?? Thanks, John
Chuck Tribolet	posted 05-24-2004 01:50 PM ET (US)             Factory swim steps are mounted in whaleboard that's under the glass. At least on my Montauk, there are no through bolts. An alternative that has been suggested if there's no board, is to hog out a void in the foam behind the mounting point, and fill it with West System, with their thickening stuff. Has anyone actually done this? Chuck

Hop to: ContinuousWave: The Whaler GAM or General AreaContinuousWave: Whaler MarketplaceContinuousWave: Whaler Repairs/ModsContinuousWave: Whaler PerformanceContinuousWave: Cetacea CommentsContinuousWave: Small Boat ElectricalContinuousWave: Trips and RendezvousContinuousWave: Post-Classic WhalersMETA-Discussion