ContinuousWave   Whaler   Moderated Discussion Areas   ContinuousWave: Whaler Repairs/Mods   Steering - Lubrication    search | FAQ | profile | register | author help

Author	Topic:   Steering - Lubrication
MyOutrage	posted 04-10-2005 09:16 PM ET (US)         I've a 1989 130 Yamaha w/ manual (not hydrolic) steering How do you go about lubricating the steering shafts. - I'm referring to the shafts that are bolted to the engine. I was looking for a grease fitting but found nothing.
adaco	posted 04-12-2005 12:51 PM ET (US)             There is a cable / steering rod system called Steering Buddy. Do a Google search and you should find information on it. Barrie
MyOutrage	posted 04-12-2005 10:32 PM ET (US)             Thanks Barrie
adaco	posted 04-14-2005 12:40 AM ET (US)             Actually, I see that the product is usually listed under Cable Buddy. It is manufactured by Davis Marine. Barrie

Hop to: ContinuousWave: The Whaler GAM or General AreaContinuousWave: Whaler MarketplaceContinuousWave: Whaler Repairs/ModsContinuousWave: Whaler PerformanceContinuousWave: Cetacea CommentsContinuousWave: Small Boat ElectricalContinuousWave: Trips and RendezvousContinuousWave: Post-Classic WhalersMETA-Discussion