Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  18 Dauntless ROD HOLDERS

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   18 Dauntless ROD HOLDERS
Dougfal posted 05-31-2005 08:32 PM ET (US)   Profile for Dougfal   Send Email to Dougfal  
Question for anyone out there. I recently purchased a 1999 18' Dauntless:

I will be sliding gimbal mounts in my rear rod holders for downriggers. In the bottom of the 4 rod holders there are holes at about every hour (picturing a clock) and a horizontal "pin" apparently locked into two of the holes. I need to reposition these horizontal pins to different holes so my gimbal mounts are angled correctly. I do not want to remove the whole rod holder. Are these "pins" moveable? Is there a special tool to aid in this? I tried BW and a local dealer, no dice.

Doug

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.