Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  Crazing repair?

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Crazing repair?
Mister S posted 08-01-2005 12:18 PM ET (US)   Profile for Mister S  
I've searched for the answer and found nothing to cover the repair needed on my 13'. The hull, worse on the bottom, is covered w/ crazed gel coat. I've stripped the old paint, and sanded but now what? I plan on painting but not sure if I should coat the gel coat w/ a skim coat of epoxy or?

Dan S.

Mister S posted 08-03-2005 07:53 AM ET (US)     Profile for Mister S    
Looks like I've answered my own question. Seems that the best route is a couple coats of a good filler / primer and then paint.

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.