Gelcoat over Epoxy - Moderated Discussion Areas

  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  Gelcoat over Epoxy

search | FAQ | profile | register | author help

Author Topic:   Gelcoat over Epoxy

cbgann posted 01-20-2006 04:40 PM ET (US)
JimH - In the keel dripping thread you mentioned that an Epoxy manufacturer had a procedure to prep the epoxy surface for Gelcoating. Do you have a contact or are you aware of a procedure that would provide a gelcoat to epoxy bond during fabrication in order avoid the out of mold painting? Thanks, Bill

Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.

Author	Topic: Gelcoat over Epoxy
cbgann	posted 01-20-2006 04:40 PM ET (US) JimH - In the keel dripping thread you mentioned that an Epoxy manufacturer had a procedure to prep the epoxy surface for Gelcoating. Do you have a contact or are you aware of a procedure that would provide a gelcoat to epoxy bond during fabrication in order avoid the out of mold painting? Thanks, Bill