ContinuousWave   Whaler   Moderated Discussion Areas   ContinuousWave: Whaler Repairs/Mods   SEALARK ORPHAN THREAD (CLOSED)    search | FAQ | profile | register | author help

Author	Topic:   SEALARK ORPHAN THREAD (CLOSED)
SeaLark	posted 01-10-2007 01:02 AM ET (US)         Well, we strating sanding and sanding and sanding. Ordered the fuel tank today, got 3 bids,florida marine coastline (WA) and atlas (CA) all the were the the same $630, for 63 gallons, intresting part is the original paperwork calls for a 56 gallon tank. The next interesting part is the floor plate/deck plate was supposed to have a screw every 18 inches well the einstien before us put a screw every 2-3 inches and most are wobled out to 3/8" plus, yep miles and miles of sanding. Thats it until epoxy. PS does anyone know how much paint it should take to cover inside and out but not the bottom? Ron ON The SeaLark
jimh	posted 01-10-2007 02:16 AM ET (US)             Please append updates to the original thread on this topic. This will centralize all information on your project to a single thread. Please repost this article to the original thread, too. Thanks.

Hop to: ContinuousWave: The Whaler GAM or General AreaContinuousWave: Whaler MarketplaceContinuousWave: Whaler Repairs/ModsContinuousWave: Whaler PerformanceContinuousWave: Cetacea CommentsContinuousWave: Small Boat ElectricalContinuousWave: Trips and RendezvousContinuousWave: Post-Classic WhalersMETA-Discussion