Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  SEALARK Orphan Thread (Closed)

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   SEALARK Orphan Thread (Closed)
SeaLark posted 01-10-2007 11:45 PM ET (US)   Profile for SeaLark   Send Email to SeaLark  
We have a nice 32 gal. in the Guardian, basicaly the same as the outrage. We put another thru hull with a sea cock in the small bilge area, the bait tank pump screws directly onto the sea cock, the bait tank mounts directly to the floor right in the middle as close to the splash well as possible, then just run the overflow into the splash well, at higher speed you may need to close the sea cock just alittle.

[Thread Closed--this appears to be an orphan or a disconnected response to something else. These orphans are going to be deleted. Please keep the discussion connected by maintaing a thread, not starting new threads.--jimh.]

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.