ContinuousWave   Whaler   Moderated Discussion Areas   ContinuousWave: Whaler Repairs/Mods   KAiner wheel removal on a 1964 13 sport    search | FAQ | profile | register | author help

Author

Topic:   KAiner wheel removal on a 1964 13 sport

Yiddil

posted 03-04-2007 04:23 PM ET (US)         Okay, who has done this...? I took the Kainer hub off, then the large nut....now, do I use a puller? Do I diconnect the WIred pullys forst? DO I have to? I want to get the original wheel off and re paint her...the kainer hub is like new, the wheel is like kaka:) Was going to spray it with some white rubber type paint or algrip or something...any help would be appreciated...don't know squat about the steering mech. on these..its the old cable kind:) Squeeks when you turn her...need to lub her as well:) Thanks in advance for help, picks willl help too:) Henry AKA THE YIDDIL

Hop to: ContinuousWave: The Whaler GAM or General AreaContinuousWave: Whaler MarketplaceContinuousWave: Whaler Repairs/ModsContinuousWave: Whaler PerformanceContinuousWave: Cetacea CommentsContinuousWave: Small Boat ElectricalContinuousWave: Trips and RendezvousContinuousWave: Post-Classic WhalersMETA-Discussion