ContinuousWave   Whaler   Moderated Discussion Areas   ContinuousWave: Whaler Repairs/Mods   Teleflex conversion 92 Yamaha 40 HP    search | FAQ | profile | register | author help

Author	Topic:   Teleflex conversion 92 Yamaha 40 HP
PeteB88	posted 10-02-2007 01:30 PM ET (US)         I am considering teleflex conversion from pulleys on 77 Classic 13. What do I need to connect the cable to my 92 Yamaha 40 pwr tilt? pb
GlennO	posted 10-03-2007 05:00 PM ET (US)             Pete, Does the Yamaha have a tilt-tube in the mounting bracket? If so the T'Flex cable has a 12" solid piece on the motor end with a threaded fitting that screws onto the tilt-tube after the end passes through it. Then a stainless steering rod from Yamaha mates that end to your motor. If you've been using the pulley steering with the motor and don't have the steering rod that's about all you should need. Again, that's if your 13 doesn't have the notched transom like my 1970 has. Hope this helps. GlennO

Hop to: ContinuousWave: The Whaler GAM or General AreaContinuousWave: Whaler MarketplaceContinuousWave: Whaler Repairs/ModsContinuousWave: Whaler PerformanceContinuousWave: Cetacea CommentsContinuousWave: Small Boat ElectricalContinuousWave: Trips and RendezvousContinuousWave: Post-Classic WhalersMETA-Discussion