Epoxy Paint Recommendation - Moderated Discussion Areas

  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  Epoxy Paint Recommendation

search | FAQ | profile | register | author help

Author Topic:   Epoxy Paint Recommendation

cindalyn posted 03-23-2008 10:16 AM ET (US)
I recently replaced my fuel tank and wanted to paint it to give it as much corrussion protection as possible. I ran across a reference to CeRam-Kote 99M which is an epoxy based paint with ceranic filler. I e-mailed CeRam-Kote and was contacted by Jim Edwards [ edboat@aol.com ]. He was extremely helpful and great to work with.
I bought a quart kit of this paint and it's great - hard as rocks. The mixing and stirring are "VERY" important as with other epoxy paints. It would have been easier to spray if I had the equipment but with Jim's help I was able to roll it successfully. Follow the directions!
http://www.ceram-kote.com/products/index.htm
Ron
Casco Bay Outrage posted 03-23-2008 05:11 PM ET (US)
Ron -
Great to hear your news. Any photos of your hard work?
C B O
cindalyn posted 03-24-2008 06:11 PM ET (US)
PHIL
Give me another week or 2 and I'll post pictures. I have the tank in with new hoses. I have to put the deck down, do a few minor repairs, attach the antenna, put the trailer fenders and guides back on then I'll be ready to test it.
Ron

Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.

Author	Topic: Epoxy Paint Recommendation
cindalyn	posted 03-23-2008 10:16 AM ET (US) I recently replaced my fuel tank and wanted to paint it to give it as much corrussion protection as possible. I ran across a reference to CeRam-Kote 99M which is an epoxy based paint with ceranic filler. I e-mailed CeRam-Kote and was contacted by Jim Edwards [ edboat@aol.com ]. He was extremely helpful and great to work with. I bought a quart kit of this paint and it's great - hard as rocks. The mixing and stirring are "VERY" important as with other epoxy paints. It would have been easier to spray if I had the equipment but with Jim's help I was able to roll it successfully. Follow the directions! http://www.ceram-kote.com/products/index.htm Ron
Casco Bay Outrage	posted 03-23-2008 05:11 PM ET (US) Ron - Great to hear your news. Any photos of your hard work? C B O
cindalyn	posted 03-24-2008 06:11 PM ET (US) PHIL Give me another week or 2 and I'll post pictures. I have the tank in with new hoses. I have to put the deck down, do a few minor repairs, attach the antenna, put the trailer fenders and guides back on then I'll be ready to test it. Ron