Photos or our 95 outrage rebuild @ Metan Marine♦

  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  Photos or our 95 outrage rebuild @ Metan Marine♦

search | FAQ | profile | register | author help

Author Topic:   Photos or our 95 outrage rebuild @ Metan Marine♦

tlabaugh posted 04-28-2008 11:01 AM ET (US)
http://tinypic.com/userstuff.php?u=gM4x3vnTYxiJFAqR9ViSlA%3D%3D
HAPPYJIM posted 04-28-2008 11:16 AM ET (US)
WOW!
That is heavy duty repairs. Was the fuel tank needind replaced or was there some other problem?
tlabaugh posted 04-28-2008 11:45 AM ET (US)
The "closed cell foam" was completely wet. It took about 4 years to get soaked and I had no idea it would be that bad.
The solution was to cut out the floor, remove the tank, take out all the wet foam, add three layer of glass inside the hull, epoxy the inside of the hull, replace the foam, install a new tank, and do an epoxy bottom job.
Todd

Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.

Author	Topic: Photos or our 95 outrage rebuild @ Metan Marine♦
tlabaugh	posted 04-28-2008 11:01 AM ET (US) http://tinypic.com/userstuff.php?u=gM4x3vnTYxiJFAqR9ViSlA%3D%3D
HAPPYJIM	posted 04-28-2008 11:16 AM ET (US) WOW! That is heavy duty repairs. Was the fuel tank needind replaced or was there some other problem?
tlabaugh	posted 04-28-2008 11:45 AM ET (US) The "closed cell foam" was completely wet. It took about 4 years to get soaked and I had no idea it would be that bad. The solution was to cut out the floor, remove the tank, take out all the wet foam, add three layer of glass inside the hull, epoxy the inside of the hull, replace the foam, install a new tank, and do an epoxy bottom job. Todd