ContinuousWave   Whaler   Moderated Discussion Areas   ContinuousWave: Whaler Repairs/Mods   Flywheel Puller Bolt Size    search | FAQ | profile | register | author help

Author	Topic:   Flywheel Puller Bolt Size
ifeedm	posted 07-05-2008 03:44 PM ET (US)         I am going to pull my motor and need to know what size the bolts are that go into the flywheel. I assume that is where I will hook on to pull from. I assume they are metric and I don't have a selection to pull from to find one. Any ideas? The part number in my book is 309492. Any help would be appreciated.
Sherman Mohnike	posted 07-05-2008 04:11 PM ET (US)             What make, size and year is your motor.
ifeedm	posted 07-06-2008 10:27 PM ET (US)             1994 115 Turbojet
jimh	posted 07-06-2008 11:33 PM ET (US)             Eyeball the size of the threaded hole. Go to a hardware store. Buy a selection of standard and metric threaded bolts. Test the bolts on your threaded hole until you find the proper bolt. Return to the hardware store. Buy the necessary bolts in the proper thread and proper strength.
seahorse	posted 07-07-2008 12:00 AM ET (US)             1994 115 Turbojet 5/16-24 threads
seahorse	posted 07-07-2008 12:02 AM ET (US)             1994 115 Turbojet 5/16-24 threads
cgodfrey	posted 07-07-2008 04:29 AM ET (US)             Spend the money to get the hardest bolts available. Grade 8, with the 3 dashes on the head if my memory serves.

Hop to: ContinuousWave: The Whaler GAM or General AreaContinuousWave: Whaler MarketplaceContinuousWave: Whaler Repairs/ModsContinuousWave: Whaler PerformanceContinuousWave: Cetacea CommentsContinuousWave: Small Boat ElectricalContinuousWave: Trips and RendezvousContinuousWave: Post-Classic WhalersMETA-Discussion