ContinuousWave   Whaler   Moderated Discussion Areas   ContinuousWave: Whaler Repairs/Mods   Replacement trim switch for Morse controls    search | FAQ | profile | register | author help

Author	Topic:   Replacement trim switch for Morse controls
pglein	posted 11-28-2008 03:12 PM ET (US)         The trim switches inside my Morse engine controls are not working correctly. I disassembled the unit and found that the little red switches that are inside the unit stick and have corroded connectors. I need to replace them, but don't know where to find them. Any ideas?
pglein	posted 11-30-2008 10:10 AM ET (US)             I've found a replacement switch kit on www.go2marine.com, which is referenced in the Teleflex Morse product guide, but no one has any pictures of it. I'm hoping I can find pictures or an explanation of exactly what is included. The price is $25 per switch, which seems high for a simple little switch. I did determine that it is a standard R9 miniature size single-pole-double-throw switch, and I found a number of manufacturers that sell them wholesale in an on-off-on configuration, but none are momentary-on, and none sell to the general public.
cohasett73	posted 12-07-2008 10:40 AM ET (US)             Allied Electronics is a good source for switches. I did a retrofit neutral safety switch installation in a older MT2 for my Bearcat. If you order online there is no minimum order amount. Tom from Rubicon

Hop to: ContinuousWave: The Whaler GAM or General AreaContinuousWave: Whaler MarketplaceContinuousWave: Whaler Repairs/ModsContinuousWave: Whaler PerformanceContinuousWave: Cetacea CommentsContinuousWave: Small Boat ElectricalContinuousWave: Trips and RendezvousContinuousWave: Post-Classic Whalers