ContinuousWave   Whaler   Moderated Discussion Areas   ContinuousWave: Whaler Repairs/Mods   Rule 750 Automatic Bilge pump    search | FAQ | profile | register | author help

Author	Topic:   Rule 750 Automatic Bilge pump
fina	posted 05-26-2009 07:35 AM ET (US)         I have the above pump and the automatic and manual has always worked. Now the automatic is NOT working. I have even turned the pump upside down so it is not the float Could the problem be at the switch? any help would be appreciated.
weekendwarrior	posted 05-26-2009 07:54 AM ET (US)             That pump has 3 wires; negative, + for the manual and + for the automatic. Make sure the automatic wire has a good connection in your fuse box or wherever it is connected to power.
fina	posted 05-27-2009 12:39 PM ET (US)             The connections are all good. Which wire coming off of the pump is for the automatic? I will try to re-splice that one.
MattInSanDiego	posted 05-27-2009 04:12 PM ET (US)             Try removing the pump from the blue strainer and push the float with your finger.
MattInSanDiego	posted 05-28-2009 12:25 PM ET (US)             Try removing the pump from the blue strainer and push the float with your finger.
fina	posted 06-01-2009 11:18 AM ET (US)             I found the problem. the brown wire coming off of the pump was broken at the splice (corroded through) thx for the help

Hop to: ContinuousWave: The Whaler GAM or General AreaContinuousWave: Whaler MarketplaceContinuousWave: Whaler Repairs/ModsContinuousWave: Whaler PerformanceContinuousWave: Cetacea CommentsContinuousWave: Small Boat ElectricalContinuousWave: Trips and RendezvousContinuousWave: Post-Classic Whalers