ContinuousWave   Whaler   Moderated Discussion Areas   ContinuousWave: Whaler Repairs/Mods   240 Outrage Lenco Trim Tabs    search | FAQ | profile | register | author help

Author

Topic:   240 Outrage Lenco Trim Tabs

don27dog

posted 06-28-2009 09:07 AM ET (US)         On the way back in last night I noticed the boat starting to pull hard to one side. I tried to adjust the trim tabs but it wasn't responding like normal. After coming to a stop I could hear the Port Actuator clicking and realized it was stuck running in full down position. It was after dark so I played around with the switch for a few mins and couldn't get it to stop so I adjusted the Starboard Tab down and continued back to the dock. The switch clicks when pressed in both the up and down postion so it doesn't seem like it is stuck but the actuator is running constantly. I was wondering if anyone has run across this problem in the past before I head down to work on it today.

Hop to: ContinuousWave: The Whaler GAM or General AreaContinuousWave: Whaler MarketplaceContinuousWave: Whaler Repairs/ModsContinuousWave: Whaler PerformanceContinuousWave: Cetacea CommentsContinuousWave: Small Boat ElectricalContinuousWave: Trips and RendezvousContinuousWave: Post-Classic Whalers