|
ContinuousWave Whaler Moderated Discussion Areas ContinuousWave: Whaler Repairs/Mods MONTAUK 17 Ski Pylon
|
Author | Topic: MONTAUK 17 Ski Pylon |
Svusse |
posted 03-09-2010 02:29 PM ET (US)
Suggest a ski pylon for a 1984 Montauk 17. |
weekendwarrior |
posted 03-09-2010 02:42 PM ET (US)
I have seen it done with a tall six-foot ski pole behind the driver's bench seat, and three cables to the lifting eyes to support the pole. The cables attached near the top of the pole. I did not get to see how the pole was attached at the bottom, but the cables are definitely carrying the bulk of the load. It seemed to work well, they were wakeboarding with it. |
Svusse |
posted 03-09-2010 03:23 PM ET (US)
Thanks, but would rather have something more factory looking |
Svusse |
posted 03-09-2010 03:26 PM ET (US)
Heard that [Swivel- Eze--apparently a brand] makes [a ski pylon] but I don't know which one to use or how it mounts |
Tom W Clark |
posted 03-09-2010 04:12 PM ET (US)
You want the Swivel-Eze model # 903-009-S. This uses a large round base plate that the pylon threads into. The arms would reach back to the transom and through-bolt there. This is a super strong ski pylon that is very easily removed when you're not waterskiing. DO NOT tow inflatables with it. |
Gezafishes |
posted 03-09-2010 04:13 PM ET (US)
There was a post within the last couple weeks regarding a bracket which mounted on the existing outboard bracket. Looked like a great product, minimizing interference with your motor and keeping your deck clear. |
Gezafishes |
posted 03-09-2010 04:22 PM ET (US)
Here it is: http://www.turboswing.nl/index.php?subject=293 |
Svusse |
posted 03-10-2010 08:26 AM ET (US)
Thanks for the input. I'm going to check out both suggestions |
kwik_wurk |
posted 03-10-2010 05:45 PM ET (US)
If anyone has an installation of a swivel-eze on a Montauk 17; I would love to see some pictures. I have always wanted one, but really would like to see how it fits and looks. Thanks in advance. |
Ridge Runner |
posted 03-11-2010 11:22 AM ET (US)
Not a Whaler but sort of close... My 1980 Wahoo 16.2 Striper with Swivel-Eze # 903-009-S: http://i166.photobucket.com/albums/u117/josephp732/My%201990%20Whaoo/ WahoowithSkiPole.jpg I also have a 2005 Montauk 170 that I have ordered a Turboswing for. I will post some pic's when I get it and do the install. I have a spare Swivel-Eze # 903-009-S that I was going to use for the 170; but decided to go the Turboswing route. Let me know if your interested in buying it. |
Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.