ContinuousWave   Whaler   Moderated Discussion Areas   ContinuousWave: Whaler Repairs/Mods   OUTRAGE 18 Rigging Access Hole In Console    search | FAQ | profile | register | author help

Author	Topic:   OUTRAGE 18 Rigging Access Hole In Console
18Whaler	posted 05-10-2010 01:17 PM ET (US)         I have a 1986 Outrage 18. I am [re-furbishing] the floor in the center console. [What is] the location of the [rigging access hole] in the console floor? Distances from the four sides of the console interior would be great. Thanks--Mark
Tom W Clark	posted 05-10-2010 01:23 PM ET (US)             The 3" x 9" oblong hole is centered fore-and-aft and is spaced 1-1/2" away from the starboard edge. The oblong hole is formed by cutting two 3" holes, 6" O.C. and then cutting the long edges straight.
18Whaler	posted 05-13-2010 03:39 PM ET (US)             Thanks for the speedy reply.

Hop to: ContinuousWave: The Whaler GAM or General AreaContinuousWave: Whaler MarketplaceContinuousWave: Whaler Repairs/ModsContinuousWave: Whaler PerformanceContinuousWave: Cetacea CommentsContinuousWave: Small Boat ElectricalContinuousWave: Trips and RendezvousContinuousWave: Post-Classic Whalers