ContinuousWave   Whaler   Moderated Discussion Areas   ContinuousWave: Whaler Repairs/Mods   Fuel Senders    search | FAQ | profile | register | author help

Author	Topic:   Fuel Senders
Blackbeard	posted 07-27-2010 08:23 AM ET (US)         Does anyone have experience with the fuel senders in the Conquest line (specifically the Conquest 28)? The starboard saddle tank has been giving me false readings and I have not yet pulled the sender because the access port seems to leave me little or no room to pull it (if it is the tube type and not the float switch type). If it is the tube type I'll have to go through the fuel fill port by pulling off the cowling, fuel fill hose, etc. Any help would be greatly appreciated. Thanks
Waccamaw Whaler	posted 07-27-2010 01:23 PM ET (US)             Before you go to too much trouble make sure your connections are clean & tight, especially the ground. It was an easy fix for my recent false readings.

Hop to: ContinuousWave: The Whaler GAM or General AreaContinuousWave: Whaler MarketplaceContinuousWave: Whaler Repairs/ModsContinuousWave: Whaler PerformanceContinuousWave: Cetacea CommentsContinuousWave: Small Boat ElectricalContinuousWave: Trips and RendezvousContinuousWave: Post-Classic Whalers