Hydraulic Steering Re-installation of Dual Helm Pumps

  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  Hydraulic Steering Re-installation of Dual Helm Pumps

search | FAQ | profile | register | author help

Author Topic:   Hydraulic Steering Re-installation of Dual Helm Pumps

Streamln1 posted 09-18-2010 07:48 PM ET (US)
I removed my hydraulic steering hoses for both station on my [non-Boston Whaler boat] center [console] so [I] could paint the boat. [N]ow [I] don[']t remember what hose goes where. [D]o you[?]
I found two hoses that back to the outboard but where on the back of the helm do [they] go[?]. The back of the [Teleflex] helm has letter and three places to connect to. [The installation of dual station hydraulic steering helm pumps has] got to be simple. [A]lso do I have to have both upper and low hoses connected to [their] helm before [I] can see if [I] have the lower helm connected right?
jimh posted 09-18-2010 09:47 PM ET (US)
Contact the manufacturer of the steering. Get the installation instructions. I would not characterize the installation of dual-station hydraulic steering helms to be a simple undertaking, and I doubt that a simple answer in this discussion can serve as a replacement for the Teleflex instructions. Teleflex typically provides their instructions on-line. I suggest you download them and study them.
contender posted 09-19-2010 10:50 AM ET (US)
Jim is correct, go to teleflex page they have instructions for the dual set up on line...

Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.

Author	Topic: Hydraulic Steering Re-installation of Dual Helm Pumps
Streamln1	posted 09-18-2010 07:48 PM ET (US) I removed my hydraulic steering hoses for both station on my [non-Boston Whaler boat] center [console] so [I] could paint the boat. [N]ow [I] don[']t remember what hose goes where. [D]o you[?] I found two hoses that back to the outboard but where on the back of the helm do [they] go[?]. The back of the [Teleflex] helm has letter and three places to connect to. [The installation of dual station hydraulic steering helm pumps has] got to be simple. [A]lso do I have to have both upper and low hoses connected to [their] helm before [I] can see if [I] have the lower helm connected right?
jimh	posted 09-18-2010 09:47 PM ET (US) Contact the manufacturer of the steering. Get the installation instructions. I would not characterize the installation of dual-station hydraulic steering helms to be a simple undertaking, and I doubt that a simple answer in this discussion can serve as a replacement for the Teleflex instructions. Teleflex typically provides their instructions on-line. I suggest you download them and study them.
contender	posted 09-19-2010 10:50 AM ET (US) Jim is correct, go to teleflex page they have instructions for the dual set up on line...