ContinuousWave   Whaler   Moderated Discussion Areas   ContinuousWave: Whaler Repairs/Mods   Console Cover Plates    search | FAQ | profile | register | author help

Author	Topic:   Console Cover Plates
Russ 13	posted 03-07-2011 06:36 AM ET (US)         Does anyone know where one could locate the Thin black Aluminum plates that Boston Whaler used to hold the instruments & switches on the factory consoles?? Thanks, Russ
blacksmithdog	posted 03-07-2011 12:31 PM ET (US)             I made mine. I believe the dimensions are available on this web site, and also on Whaler Central.
Jeff	posted 03-07-2011 01:02 PM ET (US)             Russ, Are you looking for the two that flank the steering wheel on a standard Montauk Style console? If so, I have a set I would be willing to sell.
frontier	posted 03-07-2011 07:12 PM ET (US)             Sue at Twin Cities Marine 920-793-2715.
contender	posted 03-07-2011 08:37 PM ET (US)             Russ: One day you need to take a break/trip and drive across the state to Marine Liquidators 772 465 6460, 2901 N US #1 Fort Pierce, they have bought out marine stores/dealers across the state. Worth the trip, largest marine use/new place I have found. I have seen a bunch of whaler stuff there last time I was there (Jan/2011)...
Russ 13	posted 03-08-2011 02:43 AM ET (US)             Yes. I am looking for both sizes on the parts for the switches & gauges. I will have to measure them, as I don't know the exact size. They are for a 1989 22' Outrage cuddy with the standard size console. The trip to the "other side" que scary music, sounds good. Thanks for the help. Russ

Hop to: ContinuousWave: The Whaler GAM or General AreaContinuousWave: Whaler MarketplaceContinuousWave: Whaler Repairs/ModsContinuousWave: Whaler PerformanceContinuousWave: Cetacea CommentsContinuousWave: Small Boat ElectricalContinuousWave: Trips and RendezvousContinuousWave: Post-Classic Whalers