Mercury Remote Controls Don't Move After Reassembly

  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  Mercury Remote Controls Don't Move After Reassembly

search | FAQ | profile | register | author help

Author Topic:   Mercury Remote Controls Don't Move After Reassembly

Buoy posted 04-19-2012 07:15 PM ET (US)
Hi all. I have a 2000 Mercury Optimax with the Quicksilver Commander 3000 Classic panel mount remote control. I took the control box apart to replace the Neutral Safety Switch, reassembled it and bolted the box in place. Now the control arm will not shift in forward nor reverse. Has anyone experienced this before? Any ideas on how I fix it?
Thanks in advance.

Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.

Author	Topic: Mercury Remote Controls Don't Move After Reassembly
Buoy	posted 04-19-2012 07:15 PM ET (US) Hi all. I have a 2000 Mercury Optimax with the Quicksilver Commander 3000 Classic panel mount remote control. I took the control box apart to replace the Neutral Safety Switch, reassembled it and bolted the box in place. Now the control arm will not shift in forward nor reverse. Has anyone experienced this before? Any ideas on how I fix it? Thanks in advance.