Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  Filling Screw Holes

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Filling Screw Holes
Rockrock posted 07-24-2013 02:12 PM ET (US)   Profile for Rockrock   Send Email to Rockrock  
Hi guys,

I have some screw holes to fill on my 1989 17 Montauk. Any suggestions on the best way to get a good water tight seal. I also have a rubber anchor plug,(similar to a plastic drywall anchor) the factory installed in the splash well area to hold a wiring harness. The rubber plug is loose and the plug or (rubber anchor) just turns when I attempt to tighten the screw. Any idea how to fix this or where I may get a new one?

Thanks, Rockrock

weekendwarrior posted 07-24-2013 03:33 PM ET (US)     Profile for weekendwarrior  Send Email to weekendwarrior     
I have had good luck using marine tex to fill small screw holes, and 3m 5200 and 4200 for sealing things.
jimh posted 07-24-2013 06:16 PM ET (US)     Profile for jimh  Send Email to jimh     
Read:

http://continuouswave.com/ubb/Forum3/HTML/014820.html

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.