Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Performance
  Who makes the best bracket?

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Who makes the best bracket?
Lewis posted 08-07-2002 07:12 PM ET (US)   Profile for Lewis   Send Email to Lewis  
Thanks for the wealth of information on brackets in the reference section, you've saved me a lot of time! I sold my 25 Outrage and bought a 1985 27 Cuddy with the original SeaDrives. They look pretty good and actually run really well, but I am going to repower this boat which entails installing a bracket. I have looked at all four bracket manufactures listed in the reference article, they seem fairly similar in design and cost. Anyone preferences?
Fishcop posted 08-07-2002 08:46 PM ET (US)     Profile for Fishcop  Send Email to Fishcop     
Armstrong Bracket.
Just my two cents.
Andy
tarbaby posted 08-09-2002 10:22 AM ET (US)     Profile for tarbaby  Send Email to tarbaby     
Armstrong. I put one on my boat and I could not be happier. Color is a perfect match to the hull.
Contender25 posted 08-10-2002 12:15 AM ET (US)     Profile for Contender25  Send Email to Contender25     
Bill Pottter, The gentleman who made/owned SeaCraft brand boats from 1968-1979, is now the designer and owner of the Seamark outboard engine bracket.

This bracket is made of all fiberglass and composite materials. It looks the same as an aluminum bracket but will never chip paint/oxidize, and is much much lighter.

Check them out here- (click on the link for Seamark brackets): www.hermco.net

David Jenkins posted 08-10-2002 01:12 PM ET (US)     Profile for David Jenkins  Send Email to David Jenkins     
I bought a CMC manual bracket that weighs 22 lbs. I have not opened the box yet and could easily return it. How much does an Armstrong bracket weigh? I need a bracket that would be appropriate for a 60 hp 4-stroke on a 1977 sport 15.
mustang7nh posted 08-14-2002 09:26 PM ET (US)     Profile for mustang7nh  Send Email to mustang7nh     
I have a 1988 Outrage 20 and am thinking about a bracket. I would like to be able to keep the bow down a bit more in a head sea and plane at lower speeds. Anyone have any before and after comments on their bracket?

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.