Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Performance
  HPDI 150 Pros and Cons

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   HPDI 150 Pros and Cons
alohacam posted 04-03-2004 06:27 PM ET (US)   Profile for alohacam   Send Email to alohacam  
Aloha. I am looking for any feedback on the Yamaha HPDI 150.
I have a 18.6 Gaurdian that it will be powering.
Much Mahalo
Alohacam
gss036 posted 04-05-2004 01:25 PM ET (US)     Profile for gss036  Send Email to gss036     
I see no one is jumping on this one. I don't know anything about HDI Yamaha's but have heard good thing such as thye are best engine in that type of injection. I have a friend that sells Yamahas so his opinion would biased. His only statement asked about a replacement motor was that I sell Yamaha's, but make my living working on Mercury engines. Just my 2 cents!
alohacam posted 04-05-2004 04:24 PM ET (US)     Profile for alohacam  Send Email to alohacam     
Thanks.
I have been looking for feedback and not able to find it here or other places. Our dealerhas nothing but good things to say about them, but then again they have only sold 2.
I'll keep looking.
Alohacam
macfam posted 04-05-2004 07:55 PM ET (US)     Profile for macfam  Send Email to macfam     
Alohacam,
I've had no expirience with the 150 HPDI, but plenty with the 200 HPDI. My brother has one on his 22'.
A real great motor. Quiet, no smoke, easy on gas and oil.
Never a problem...quite impressive.
I would assume the same for a 150.
I have a Yammie 250 OX 66. Not nearly as fuel/oil efficient as the HPDI (I wish the hell it was)
All in all, I think Yamaha makes a great product.
In the area where I boat in the Northeast (Cape Cod) they own the water....
TRAFFICLAWYER posted 04-05-2004 08:36 PM ET (US)     Profile for TRAFFICLAWYER    
Excellent motor, well proven, smokeless good fue efficiency. I have a pair of 03 200 HPDI's on my Conquest.
For more info go here:

http://outdoorsbest.zeroforum.com/zeroforum?id=16

Clark Roberts posted 04-05-2004 11:25 PM ET (US)     Profile for Clark Roberts  Send Email to Clark Roberts     
I only know one person (my close neighbor Dennis Hall)who has had a Yamaha 150hp HPDI and it was on a 22' Pathfinder CC. He used it for about 6 months and after some problems (I don't know what) it blew a power head. He said there was metal shavings in one of the cyls but dealer didn't really explain it to him. He traded for a Yamaha 150 four stroke.
Clark Roberts posted 04-05-2004 11:26 PM ET (US)     Profile for Clark Roberts  Send Email to Clark Roberts     
edit: "there were metal shavings"

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.