Moderated Discussion Areas
  ContinuousWave: Whaler Performance
  Kicker for 1980 Outrage V22

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Kicker for 1980 Outrage V22
Mr Blue Wine posted 04-24-2004 02:45 PM ET (US)   Profile for Mr Blue Wine   Send Email to Mr Blue Wine  
Hello all-
I have a 1980 Outrage V22..w/200hp Merc. Even though the merc is in good shape I don't REALLY trust it. I have a 10hp Honda I was thinking of putting on as a kicker just in case...
Any comments or suggestions on power/mounting, etc.
Joe Kriz posted 04-24-2004 05:01 PM ET (US)     Profile for Joe Kriz  Send Email to Joe Kriz     
Blue Wine,

Most people mount the kicker directly on the transom if possible. They also mount them on the Starboard side which is preferred. Obviously, if you have something on the Starboard side like I do, then the Port side does work fine.

A Long Shaft (20 inch shaft) is what you want to use. Even a Montauk uses a Long Shaft Kicker.

Here are photos of my Outrage 18 with an 8 HP Evinrude.

northwhaler posted 04-24-2004 10:43 PM ET (US)     Profile for northwhaler  Send Email to northwhaler     
I don't know what your transom looks like, but if there isn't room in the motor well for your kicker, check out for mounting brackets for kicker motors on Whalers.

I used one to mount my 8HP Yamaha on my 20' Ventura. Brackets are very well made, and are built with the proper curve to match the curve of the Whaler transom. Motor setback is proper so that it tilts up completely without hitting anything.


Post New Topic  Post Reply
Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.