Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Performance
  Standard Horizon CP160 Update

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Standard Horizon CP160 Update
nerifol posted 06-25-2004 08:35 AM ET (US)   Profile for nerifol   Send Email to nerifol  
The CP160 finally turned on, displayed the logo and turned off again. It continued to do this cycle until I disconnected the power.

Right now is being repaired in the factory and I would like to know if anybody has experienced this type of problem.

elaelap posted 06-25-2004 11:09 AM ET (US)     Profile for elaelap  Send Email to elaelap     
I recently bought a monochrome 160 at a bargain price thru BoatsUS, but it would only fire up for a minute or so and then signal "Abort" and give me some sort of code. I called Standard Horizon, was told it was a software problem and was directed to C-Map. Those folks sent me a software upgrade chip which downloaded in seconds, and the plotter has worked flawlessly ever since.

Tony

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.