ContinuousWave   Whaler   Moderated Discussion Areas   ContinuousWave: Whaler Performance   REVENGE 22 Cuddy: Shaft Length    search | FAQ | profile | register | author help

Author	Topic:   REVENGE 22 Cuddy: Shaft Length
nnylip	posted 08-26-2007 08:16 PM ET (US)         What is the recommended engine shaft length for the Revenge 22 Cuddy? I checked but the information was missing for that boat. Thanks. Lou
jimh	posted 08-26-2007 08:29 PM ET (US)             A REVENGE 22 Cuddy outboard model with the normal notched transom uses the same shaft motors as all the 22-foot hulls with outboard transoms: 25-inch shaft for single engine; 20-inch shaft for twin engines. Are you certain you are looking at a Revenge 22 Cuddy? It is quite a rare model. I would love to see a few pictures of one.
nnylip	posted 08-26-2007 08:30 PM ET (US)             Thanks Jim! - Lou
nnylip	posted 08-26-2007 08:32 PM ET (US)             Meant to put this in the previous post, check: [Deleted link to an on-line auction; the boat was NOT a Boston Whaler REVENGE 22 Cuddy.] I would love to buy it, but life has its problems :-) You have about 16 hours. Lou
jimh	posted 08-26-2007 09:10 PM ET (US)             If the boat you linked to above is what you are inquiring about, it is a REVENGE 22, not a REVENGE 22 Cuddy. This is a slightly different and earlier model from the REVENGE 22 Walk-Through.
jimh	posted 08-26-2007 09:11 PM ET (US)             See this CETACEA article for more information on the various REVENGE models: http://continuouswave.com/whaler/cetacea/cetaceaPage46.html
nnylip	posted 08-26-2007 09:39 PM ET (US)             thanks again!

Hop to: ContinuousWave: The Whaler GAM or General AreaContinuousWave: Whaler MarketplaceContinuousWave: Whaler Repairs/ModsContinuousWave: Whaler PerformanceContinuousWave: Cetacea CommentsContinuousWave: Small Boat ElectricalContinuousWave: Trips and RendezvousContinuousWave: Post-Classic WhalersMETA-Discussion