Moderated Discussion Areas
  ContinuousWave: Whaler Performance
  Mercury OptiMax Winterization Procedure

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Mercury OptiMax Winterization Procedure
pap posted 09-20-2007 12:41 AM ET (US)   Profile for pap   Send Email to pap  
[What is the procedure for preparing] a Mercury Optimax 200-HP [for lay-up]? What all do I do with that? Thank you.

[An historical narrative of procedures used by the author to prepare non-OptiMax motors for lay-up was included in his inquiry.]

Casco Bay Outrage posted 09-20-2007 08:44 AM ET (US)     Profile for Casco Bay Outrage  Send Email to Casco Bay Outrage     
Have you checked the owner's manual? Many brands have detailed instructions on lay-up and storage with diagrams.

If you don't have a manual, it is worth the money.


jimh posted 09-20-2007 09:45 PM ET (US)     Profile for jimh  Send Email to jimh     
Although the author included a narrative of the procedures he had used when preparing outboard motors with a carburetor for long lay-up, I much prefer to refer readers to the very comprehensive and well-researched procedure published in the REFERENCE section in

islandmanagers posted 09-20-2007 10:13 PM ET (US)     Profile for islandmanagers  Send Email to islandmanagers     

huh, huh... huh, huhhuh... huhuhu

poster smirks, Neener, neener, neeener... :P

TexasWhaler posted 09-22-2007 08:19 PM ET (US)     Profile for TexasWhaler  Send Email to TexasWhaler     
This is from Mercury Marine: StorageInformation-OptiMax.pdf

Post New Topic  Post Reply
Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.