Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Small Boat Electrical
  Trolling motor installation Montauk 150

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Trolling motor installation Montauk 150
MCP posted 03-07-2007 02:03 PM ET (US)   Profile for MCP   Send Email to MCP  
Can you guys give me any photos or advice on bow trolling motor installations? Also will a 12V be adequate for a 150?
jenkinsph posted 03-10-2007 09:49 AM ET (US)     Profile for jenkinsph  Send Email to jenkinsph     
MCP, do a local search since there have been several discussions on this in FEB '07 . A good 12v unit will do
the job, I use a 24v 82lb motorguide PTS and it will move it
to hullspeed.

Steve

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.