Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Small Boat Electrical
  2003 90HP Mercury No spark

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   2003 90HP Mercury No spark
wrcook posted 07-24-2007 09:20 PM ET (US)   Profile for wrcook   Send Email to wrcook  
Hi,
I've been trying to troubleshoot a problem with my 2003 2-stroke 90HP Mercury. I've been through basic trouble shooting per the Seloc manual. Checked kill wire - no voltage, disconnected kill wire - still no spark. Finally noticed yellow stator wires fused at bullet connectors from apparent overload. I suspect the voltage regulator is bad but am wondering if I should replace the stator as well. I don't have a peak reading volt meter but my volt meter indicates some AC (~12 volts) voltage on the yellow stator wires while cranking. Appreciate your input.

Thanks,
Billy Cook

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.