Sources For Wiring Diagrams for Wellcraft Boats Made c.1986

  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Small Boat Electrical
  Sources For Wiring Diagrams for Wellcraft Boats Made c.1986

search | FAQ | profile | register | author help

Author Topic:   Sources For Wiring Diagrams for Wellcraft Boats Made c.1986

aftica22 posted 02-23-2008 08:56 AM ET (US)
iam looking for wiring diagram for 1986 23ft wellcraft boat the boat had a 86 yamaha 200 on it .we had 1999 200hp fuel injection put on boat with a digtial tack from the 1999 motor the tack shows 88 than goes to 0. then you can start motor.the rpms are workinr ok all above seems to be working ok the 3 bars on the bottom never light up or or change stays black .we don;t know if the alarm system is working or how to wire it,we tested existing warning buzzer it is ok any help would be appreciated very much
Glenn
jimh posted 02-24-2008 07:15 PM ET (US)
Glenn--There are no archives here of wiring diagrams for Wellcraft boats made in 1986. We do not attempt to make indexes of other websites or their contents, so I suggest that you use the resources of GOOGLE.COM to search for this information.
PeterDE posted 02-24-2008 08:53 PM ET (US)
Go to the wellcraft site http://www.wellcraft.com/
at the bottom of the screen click on Owners
At this point you have to allow pop-ups
Select Owners Manuals
Select Outboard SeaDrive Owner's Manual
They also have I/O manuals for 1980's and 90's which may have very similar wiring.

Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.

Author	Topic: Sources For Wiring Diagrams for Wellcraft Boats Made c.1986
aftica22	posted 02-23-2008 08:56 AM ET (US) iam looking for wiring diagram for 1986 23ft wellcraft boat the boat had a 86 yamaha 200 on it .we had 1999 200hp fuel injection put on boat with a digtial tack from the 1999 motor the tack shows 88 than goes to 0. then you can start motor.the rpms are workinr ok all above seems to be working ok the 3 bars on the bottom never light up or or change stays black .we don;t know if the alarm system is working or how to wire it,we tested existing warning buzzer it is ok any help would be appreciated very much Glenn
jimh	posted 02-24-2008 07:15 PM ET (US) Glenn--There are no archives here of wiring diagrams for Wellcraft boats made in 1986. We do not attempt to make indexes of other websites or their contents, so I suggest that you use the resources of GOOGLE.COM to search for this information.
PeterDE	posted 02-24-2008 08:53 PM ET (US) Go to the wellcraft site http://www.wellcraft.com/ at the bottom of the screen click on Owners At this point you have to allow pop-ups Select Owners Manuals Select Outboard SeaDrive Owner's Manual They also have I/O manuals for 1980's and 90's which may have very similar wiring.