Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Small Boat Electrical
  Shore Power Help

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Shore Power Help
Salty Tricks posted 07-19-2009 09:21 PM ET (US)   Profile for Salty Tricks   Send Email to Salty Tricks  
I want to install shore power...actually the components are already installed; SP receptacle to hook 30amp service from shore, a small 3 breaker service panel w/main, bat.charger, 15 amp convenience receptacle, and a Xantrex battery charger. I rarely want to hook up shore power but if I do I need to wire this right. My only concern is if I need a galvanic isolator for the rare time I hook up to shore power to charge the batteries
jimh posted 07-20-2009 12:13 AM ET (US)     Profile for jimh  Send Email to jimh     
Good information on the need for a galvanic isolator is given by Yandina Marine Electronics at

http://www.yandina.com/electrolysis.htm

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.