ContinuousWave   Whaler   Moderated Discussion Areas   ContinuousWave: Small Boat Electrical   Wiring CMC trim to Yamaha control    search | FAQ | profile | register | author help

Author	Topic:   Wiring CMC trim to Yamaha control
tjxtreme	posted 02-08-2010 03:13 PM ET (US)      I just bought a CMC power tilt/trim unit for my outboard. It came without the wiring harness. I already have a Yamaha control, that has a trim switch and 3 wires ready to connect to something. Looking at the CMC owners manual (page 7), I need 2 relays and the wiring harness. http://cook-mfg.net/PDFs/PT35%20Owners%20Manual.pdf I priced a few harnesses online for $150 or so, which seems ridiculous for a few wires. I am thinking of wiring it myself, but don't know what the two inline components (rectangular one and long skinny one) are on the harness. Fuse? Any ideas? Thanks
an86carrera	posted 02-08-2010 03:30 PM ET (US)             The square item is a circuit breaker the other is a fuse. Len

Hop to: ContinuousWave: The Whaler GAM or General AreaContinuousWave: Whaler MarketplaceContinuousWave: Whaler Repairs/ModsContinuousWave: Whaler PerformanceContinuousWave: Cetacea CommentsContinuousWave: Small Boat ElectricalContinuousWave: Trips and RendezvousContinuousWave: Post-Classic Whalers