Moderated Discussion Areas
  ContinuousWave: Small Boat Electrical
  source for waterproof ignition harness

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   source for waterproof ignition harness
harwichboy posted 06-12-2011 08:38 PM ET (US)   Profile for harwichboy   Send Email to harwichboy  
I am restoring my Nauset 16 - including sorting out the electrical and removing 5-6 no longer used accessory wires.

In order to simplify removal of electrical next time, I would like to put in a waterproof connector into the full ignition harness.

Does anyone know of something with the right properties? 8-10 wires in a connector that can be sealed for sending it through the tunnel?

Thanks for any pointers.

Neil (harwichboy)

pcrussell50 posted 06-13-2011 01:13 AM ET (US)     Profile for pcrussell50  Send Email to pcrussell50     
See if these will be suitable for your needs.

I'm not sure if they carry certification by the marine wiring authority, whose name escapes me.


Post New Topic  Post Reply
Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.