Moderated Discussion Areas
  ContinuousWave: Small Boat Electrical
  Merc throttle cable installation

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Merc throttle cable installation
sjkmerc posted 07-10-2011 02:52 PM ET (US)   Profile for sjkmerc   Send Email to sjkmerc  
Replaced a throttle cable on a 1984 75HP Mercury motor. The motor will not start now. any suggestions on proper install.
Seems I am not getting gas and intermittent spark. Is there a switch that the cable has to sit on.
jimh posted 07-11-2011 08:14 AM ET (US)     Profile for jimh  Send Email to jimh     
Please seek advice on the installation of a mechanical throttle cable in the REPAIRS/MODS discussion. This discussion is focused on electrical systems.

[Thread closed.]

Post New Topic  Post Reply
Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.