Moderated Discussion Areas
  ContinuousWave: Small Boat Electrical
  Special spark plug socket needed for F60 spark plug removal/installation?

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Special spark plug socket needed for F60 spark plug removal/installation?
KeyRat posted 09-12-2011 06:41 PM ET (US)   Profile for KeyRat   Send Email to KeyRat  
I went to replace the spark plugs on my 2007 F60 this weekend and realized that neither my 5/8" or 13/16" spark plug socket fit the NGKs I picked up. I managed to find an 18mm spark plug wrench at a local auto parts store but when I got home I was saddened to find that the socket won't fit all the way onto the plug because it hits some little tab.

Has anyone else run into this problem?

I read online about a "thin walled" 18mm spark plug socket that guys use on dirt bikes but before I shell out $20 for a single socket I thought I'd post here first.



contender posted 09-15-2011 10:48 AM ET (US)     Profile for contender  Send Email to contender     
Try a deep wall 3/4, plugs come in this size also...

Post New Topic  Post Reply
Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.