polling platform - Moderated Discussion Areas

  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Post-Classic Whalers
  polling platform

search | FAQ | profile | register | author help

Author Topic:   polling platform

awares posted 02-26-2001 09:24 PM ET (US)
Where can you purchase or have a polling
platform made for the 2001 13' Sport?
I would like to install one on mine for fishing the flats in the back bays of Texas.
Has anybody seen one installed on one of the newer rigs yet? Can the boat support it?
Comments and concerns welcomed.
chad posted 02-28-2001 10:23 PM ET (US)
Tops-n-Towers on nasa road 1 in Clear Lake Texas can handle most any marine fabrication.
www.topsntowers.com
awares posted 03-01-2001 03:25 PM ET (US)
Chad,
Thanks for the contact. I talked to Darrel there today and he said it would not be a problem. The only thing is that he needs the boat to build to fit since he has not done one for the 2001 Sport.
It looks like I'm now on my way to Seabrook
Texas. I sure hope this is a good trailer because I am putting some road miles on it already.
I also asked him to install a bracket off of the tower to support a trolling motor. If
I'm out there without my son I'll use the
troll motor.
Can you think of anything else I should consider?
Thanks, Allen Wares
stagalv posted 03-01-2001 04:46 PM ET (US)
Hey Allen,
Let me know how it comes out. I am thinking of something along the same lines. Rex
2001 13 Sport Owner posted 03-01-2001 05:52 PM ET (US)
Awares! Can't wait to see how it turns out. I think by the time you are finished outfitting your 13 Sport, it will the most tricked out 13 around! Keep us all up to date. Thanks!

Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.

Author	Topic: polling platform
awares	posted 02-26-2001 09:24 PM ET (US) Where can you purchase or have a polling platform made for the 2001 13' Sport? I would like to install one on mine for fishing the flats in the back bays of Texas. Has anybody seen one installed on one of the newer rigs yet? Can the boat support it? Comments and concerns welcomed.
chad	posted 02-28-2001 10:23 PM ET (US) Tops-n-Towers on nasa road 1 in Clear Lake Texas can handle most any marine fabrication. www.topsntowers.com
awares	posted 03-01-2001 03:25 PM ET (US) Chad, Thanks for the contact. I talked to Darrel there today and he said it would not be a problem. The only thing is that he needs the boat to build to fit since he has not done one for the 2001 Sport. It looks like I'm now on my way to Seabrook Texas. I sure hope this is a good trailer because I am putting some road miles on it already. I also asked him to install a bracket off of the tower to support a trolling motor. If I'm out there without my son I'll use the troll motor. Can you think of anything else I should consider? Thanks, Allen Wares
stagalv	posted 03-01-2001 04:46 PM ET (US) Hey Allen, Let me know how it comes out. I am thinking of something along the same lines. Rex
2001 13 Sport Owner	posted 03-01-2001 05:52 PM ET (US) Awares! Can't wait to see how it turns out. I think by the time you are finished outfitting your 13 Sport, it will the most tricked out 13 around! Keep us all up to date. Thanks!