Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Post-Classic Whalers
  170 Montauk, Barney's RPS Modification

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   170 Montauk, Barney's RPS Modification
Barney posted 10-26-2003 09:33 AM ET (US)   Profile for Barney   Send Email to Barney  
These mods to the 170 RPS only involve removing the seat bottom screws, leave the RPS cushion snapped:

http://myweb.cableone.net/barney9014/images/17/11.jpg

I did this to get easier access to the 2 13-gallon Tempo tanks.

Also, if you don't have access to equipment to make a beautiful RPS storage compartment like ghefty (George), you can still get a storage area above your Pate tank with this same mod. You'll need some small storage boxes.

This mod has been tested by local experts and found to be excellent. The seat bottom stays in place. Jim

Knot at Work posted 10-26-2003 10:50 AM ET (US)     Profile for Knot at Work  Send Email to Knot at Work     
Jim you are simply once again a inventor of the highest order. I also find that neccessity breeds most inventions.

Your going to have to get a pattent on all your designs!

BW may be forced to offer you a stipend!

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.