Moderated Discussion Areas
  ContinuousWave: Post-Classic Whalers
  RPS for 17 Outrage

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   RPS for 17 Outrage
CaJeff posted 11-04-2003 12:06 PM ET (US)   Profile for CaJeff   Send Email to CaJeff  
Broke the plastic hinge pieces the seat back fits over onto the deck. Any idea where I could pick up new ones? Local dealer Schock boats in Newport advises not made anymore.
Tempted to hand over to machine $hop any idea what type of plastic parts are made, Delrin or?
whalersman posted 11-04-2003 07:52 PM ET (US)     Profile for whalersman  Send Email to whalersman     

I don't know if you are talking about the 17 Outrage I, or the 17 Outrage II...

My 1997 17 Outrage II, and a friends 1996 17 Outrage II, RPS was made by:
GG Schmitt & Sons, Lancaster PA. & Bradenton FL.

If you have an 17 Outrage II, then you probably have the same RPS..
Try giving them a call and see if they can sell you the parts..

Good Luck

CaJeff posted 11-05-2003 01:33 AM ET (US)     Profile for CaJeff  Send Email to CaJeff     
I have a 1997 Outrage 17. I will give GG Schmitt a call. Thanks.
CaJeff posted 11-08-2003 04:23 PM ET (US)     Profile for CaJeff  Send Email to CaJeff     
Ordered the parts. Apparently GG Schmitt makes lots of stainless parts for BW. Good source for stainless pieces.
web page:
phone: 1-888-252-5446
Hope this helps someone else.
whalersman posted 11-11-2003 02:29 AM ET (US)     Profile for whalersman  Send Email to whalersman     

I'm glad you were able to order the parts you needed...

GG Schmitt does make a lot of things for the newer Whalers...

It is always nice to hear that someone can still order parts...


Post New Topic  Post Reply
Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.