Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Post-Classic Whalers
  Wood diagrams SL16

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Wood diagrams SL16
CHRISWEIGHT posted 01-19-2004 03:40 PM ET (US)   Profile for CHRISWEIGHT   Send Email to CHRISWEIGHT  
Does anyone have access to wood diagrams for an SL16, I want to attach rod holders from the inside of the hull or from on top of the gunnels and need hardpoints for the screws.

I am thinking of the area between the low port and starboard rails near the stern and the higher rails which run forward past the consoles.

It would appear from a 1994 diagram of a 15gls that they have reinforcment for about 2' 6" from the stern going forward is this true of most whalers? and can you confirm for an SL.

Is the 15GLS a good comparison in terms of wood placment or is there a better guide I should be considering.

regards chris

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.