Moderated Discussion Areas
  ContinuousWave: Post-Classic Whalers
  Rage 115hp overheating alarm question

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Rage 115hp overheating alarm question
Cyanide96VR6 posted 04-11-2005 06:53 PM ET (US)   Profile for Cyanide96VR6   Send Email to Cyanide96VR6  
I just inherited a 1995 Rage jet 115 from an uncle of mine. It had been sitting unused for about 2 years out of the water. The problem is that when i put it in the water, after about 2 min of use, i get the high temp alarm. I tried flushing out the cooling system and got about a handful of sand. After that, i put it back in the water and i still get the alarm. In the driveway, i get good water pressure out the back and no alarms, but as soon as i drive it in the water, i get the damn alarms. Could it be bad thermostats? What is the proper way to flush out the cooling system? Thanks.
WHALER27CC posted 04-11-2005 08:49 PM ET (US)     Profile for WHALER27CC  Send Email to WHALER27CC     
I posted a reply in the repair section, for what its worth.


where2 posted 04-11-2005 10:10 PM ET (US)     Profile for where2  Send Email to where2     
I too posted a reply in the repair section, because it was a repair issue.

Post New Topic  Post Reply
Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.