Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Post-Classic Whalers
  Finally got some pics of my 130 Sport

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Finally got some pics of my 130 Sport
Royboy posted 04-22-2005 11:43 PM ET (US)   Profile for Royboy   Send Email to Royboy  
Still need some underway, but that will have to wait until the waether improves here (calling for snow this weekend). Anyway, here she is: http://photobucket.com/albums/v406/MC1888/Ichthus/

Roy
Ichthus
130 Sport

Woodee posted 04-23-2005 10:51 AM ET (US)     Profile for Woodee  Send Email to Woodee     
Hey Royboy-SWEET job on the bracket! I'm wondering about the square cut-out on one lower corner?
Woodee
Royboy posted 04-24-2005 08:32 AM ET (US)     Profile for Royboy  Send Email to Royboy     
I didn't want anything to interfere with my tie down, and once I got that in my head, it kinda stuck there. I suppose my thinking was that I didn't want an edge to rub through any possible tie down, so I eliminated the metal there.

Roy

Woodee posted 04-24-2005 10:01 AM ET (US)     Profile for Woodee  Send Email to Woodee     
I see, as much support for the kicker as possible without wearing through the strap - Brilliant! What stock is the metal portion fabbed from?
Woodee
Royboy posted 04-25-2005 01:30 PM ET (US)     Profile for Royboy  Send Email to Royboy     
It's 6065 T6 Aluminum in 3/8" Plate. The whole thing took slightly less than a 18 X 24" piece. I chose it for it's welding abd machining attributes.

Roy

Moe posted 04-25-2005 02:06 PM ET (US)     Profile for Moe  Send Email to Moe     
VERY nice!

--
Moe

hardensheetmetal posted 04-25-2005 05:18 PM ET (US)     Profile for hardensheetmetal  Send Email to hardensheetmetal     
Roy-

Nice use of the Whaler font, looks good.

Dan

rhogg posted 04-25-2005 11:51 PM ET (US)     Profile for rhogg  Send Email to rhogg     
Roy

Is the high seatback standard? I haven't seen that before.

My compliments on a very nicely outfitted boat.

Royboy posted 04-26-2005 09:04 AM ET (US)     Profile for Royboy  Send Email to Royboy     
The seat back was apparently standard in 2000, but was changed shortly thereafter. It's quite comfortable, but must be tied down while towing. If not tied down it is very prone to snapping open, which it doesn't look like it was designed for. Folded down, it's easy to step over to gain access to the aft cockpit. It's carpeted on the back and it's sturdy enough to stand on, although I wouldn't recommend it in anything but flat calm conditions. I like it being one long bench vs. a couple of seats because it's very easy to balance the load side to side this way.

Roy

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.