Moderated Discussion Areas
  ContinuousWave: Post-Classic Whalers
  repairing stripe on hull

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   repairing stripe on hull
tesija posted 08-25-2005 10:35 PM ET (US)   Profile for tesija   Send Email to tesija  
Any special issues to consider in repairing/replacing the stripe on the side of the hull. My fuel vent leaked gas onto the stripe and bottom paint below it, causing about 6 inches of both to come off. Repair suggestions?
frontier posted 08-25-2005 11:20 PM ET (US)     Profile for frontier  Send Email to frontier     
We repaired the stripe on our Revenge by cutting out the damaged section & replacing it. Looked good. What size & color stripe on your boat? I have some 1" wide black left over - be glad to send you some.
tesija posted 08-26-2005 08:22 PM ET (US)     Profile for tesija  Send Email to tesija     
That's exactly what I have- only need about 12 inches. Be happy to exchange contact info.

Post New Topic  Post Reply
Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.