Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Post-Classic Whalers
  1996 OR 17 In floor box

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   1996 OR 17 In floor box
Jakwolf posted 07-20-2006 01:11 AM ET (US)   Profile for Jakwolf   Send Email to Jakwolf  
I finally noticed the holes that probably held a strut to support the heavy hatch that covers the big aft in-floor hold. Can anybody help with a pic of theirs, or perhaps a # off their hydraulic strut? A pic would be really helpful of how the original was installed, so I could replicate it. Thanks Whalers.
Royboy posted 07-20-2006 11:10 PM ET (US)     Profile for Royboy  Send Email to Royboy     
I'll try to remember to take a picture of mine. It's a gas strut though, not hydraulic. It's on the starboard side of the box. It's also rusting, so if you find a good source, let me know.

Roy

Arcturus posted 07-23-2006 09:11 PM ET (US)     Profile for Arcturus  Send Email to Arcturus     
Here's a link to gas springs. I was going to replace mine but lost it over the winter. If you can figure out which one works on the 17 outrage 11 I'd love to know. That lid is dangerous without it.

http://www.spdhardware.com/gs1.htm

Thanks
JackT

PJB posted 07-25-2006 01:04 PM ET (US)     Profile for PJB  Send Email to PJB     
Springlift by Attwood

3441MG 0140N 105/02 A 2
SL14-30-1

I picked mine up from Whaler a few years ago. Hope it helps you.

Arcturus posted 07-26-2006 12:22 AM ET (US)     Profile for Arcturus  Send Email to Arcturus     
Thanks for that, PJB.

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.