Moderated Discussion Areas
  ContinuousWave: Post-Classic Whalers
  Moeller On Deck Gas Tank

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Moeller On Deck Gas Tank
howlingdogsteve posted 03-20-2008 07:51 AM ET (US)   Profile for howlingdogsteve   Send Email to howlingdogsteve  
I bought one of their 12 gal. gas tanks.
It has a plastic swivel fitting up top.
I can't figure out how to make it swivel or turn in the direction of my fuel line.
(Feels like it could easily break.)
Also, I'm putting a brass quick disconnect fitting on for a Mercury 4 stroke.
Does this need any sealant or does it go on dry?

Thanks again

GreatBayNH posted 03-20-2008 08:50 AM ET (US)     Profile for GreatBayNH  Send Email to GreatBayNH     
For sealant use Teflon Tape found at West Marine or any marine supply store.

boatdryver posted 03-20-2008 09:56 AM ET (US)     Profile for boatdryver  Send Email to boatdryver     
I have two of these under the seat of my Montauk. those swivels just turn without breaking on mine


Feejer posted 03-20-2008 10:28 AM ET (US)     Profile for Feejer  Send Email to Feejer     
See this link for thread sealant

Post New Topic  Post Reply
Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.